Sage 15 progress: cabin and deck

this past week has been busy for Matt and Jerry –

Bonding the liner in place.

The sides where the liner is resting against the hull were bonded before.  Now the edges where the liner and hull don’t touch are bonded.

Jerry working on the under cockpit bulkhead and stringers.

Jerry working on the under cockpit bulkhead and stringers.

Under cockpit supports have been coated in resin and fully tabbed into place. Next the structure is fully covered in gel coat.

Under cockpit supports have been coated in resin and fully tabbed into place. Next the structure is fully covered in gel coat.

Jerry bonding the aft edge of the liner in place.

Jerry bonding the aft edge of the liner in place.

The cabin setup is complete –

The interior teak cut and teak oiled prior to install.

The interior teak cut and teak oiled prior to install.

Interior teak being installed.

Interior teak being installed.

Interior teak installed.

Interior teak installed.

The deck hardware has mostly been installed –

Matt sanding off the sharp edge after cutting out the companionway opening.

Matt sanding off the sharp edge after cutting out the companionway opening.

Foredeck hardware.

Foredeck hardware.

Matt installing cabintop hardware.

Matt installing cabintop hardware.

Starboard side of the cabintop hardware in place and the cabin window installed (the portlight is the same as the aft portlight on the Sage 17).

Starboard side of the cabintop hardware in place and the cabin window installed (the portlight is the same as the aft portlight on the Sage 17).

Installing the companionway teak.

Installing the companionway teak.

The final steps are now being done so the hull and deck can be bonded together –

Jerry laying out the locations for the transom hardware. Standard are the outboard motor mount, gudgeons and boarding ladder.

Jerry laying out the locations for the transom hardware. Standard are the outboard motor mount, gudgeons and boarding ladder.

Deck raised up so can be put onto hull.

Deck raised up so can be put onto hull.

The deck is set on the hull and final fit is confirmed.

The deck is set on the hull and final fit is confirmed.

– Dave

One thought on “Sage 15 progress: cabin and deck

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s