A busy week on the third Sage 15, a SageCat version, to get her ready for the Annapolis Sailboat Show – (click on these images for larger versions and descriptions)
Deck as hardware install beings.
Bulkheads, stringers and daggerboard trunk bonded into place.
Gel coat applied to the under cockpit storage areas and aft flotation foam in place.
Hull liner being fitted into place.
Under cockpit areas being prepped for gel coat application.
Hull liner bonded in place.
Deck hardware being installed
Hull liner being bonded into place.
In preparation for production a ‘splash’ of the cabin top was made to be a drilling template for setting the deck hardware –
Cabin top sprayed with mold release.
Fiberglass being layed over the cabin top to build the hardware fastener drilling template.
Adding stiffeners to the hardware template.